Tenda F3 Login

Default IP address, username & password · Updated

Quick answer

The Tenda F3 uses 192.168.0.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.0.1 in a browser and sign in with username "admin" and password "admin". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.

The Tenda F3 uses 192.168.0.1 as its default admin address. Open http://192.168.0.1 (or http://tendawifi.com) while connected to the router and sign in with the username admin and password admin.

Newer Tenda models have no default password; log in at tendawifi.com and set one.

How to log in to the Tenda F3

  1. Connect to the Tenda F3. Connect your device to the Tenda F3 by Wi-Fi or Ethernet cable.
  2. Open the admin page. Type http://192.168.0.1 (or http://tendawifi.com) into your browser's address bar.
  3. Log in. Use username admin and password admin.
  4. Secure the router. Change the admin password and the Wi-Fi password, then save.

Change the F3 Wi-Fi name and password

  1. Log in to the Tenda F3 admin panel.
  2. Open Wireless (or Wi-Fi Settings).
  3. Edit the network name (SSID) and set a strong WPA2/WPA3 password.
  4. Save, then reconnect your devices with the new password.

Factory reset the Tenda F3

Hold the reset button for 10 to 15 seconds while the F3 is on. When the lights flash, release it and wait about two minutes. The login returns to admin / admin at 192.168.0.1.

Default network settings

LAN IP (gateway)192.168.0.1
Subnet mask255.255.255.0
DHCP range (typical)192.168.0.1 to 192.168.0.254
BrandTenda (China)

Tenda F3 FAQ

What is the Tenda F3 default IP address?

The Tenda F3 uses 192.168.0.1 by default. You can also open tendawifi.com.

What is the Tenda F3 default password?

Out of the box, the Tenda F3 uses username admin with password admin. If those no longer work, the login was changed and a factory reset brings them back.

How do I factory reset the Tenda F3?

With the F3 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.0.1 to sign in with the defaults and set it up again.