Wyse Default Password
Servers, Terminals & Hardware · 6 default logins · Updated
The most common default login for Wyse devices is username blank (leave it empty) and password "Fireport". There are 6 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
Fireport- Known combinations
- 6
Looking for the default login of a Wyse server or hardware device? Below are the documented factory credentials. Wyse has 6 documented default logins. The most common username is (blank) (2 entries) and the most common password is Fireport.
Wyse default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (blank) | Fireport | Product-specific | — |
| 2 | (blank) | password | Common word | by satadru |
| 3 | VNC | winterm | Product-specific | — |
| 4 | rapport | r@p8p0r+ | Product-specific | — |
| 5 | root | (blank) | Blank password | — |
| 6 | root | wyse | Vendor name | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Wyse defaults tell you
- 1 of 6 entries use a blank password: leave the password field empty.
- 2 entries have no username: type only the password.
- 1 entry includes a note on the product, access method or privilege level: check the Notes column.
- Wyse has the 40th longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Wyse default login at a glance
| Brand | Wyse |
|---|---|
| Category | Servers, Terminals & Hardware |
| Known default logins | 6 |
| Unique usernames | 4 |
| Unique passwords | 6 |
| Blank passwords | 1 of 6 |
| List size rank | 40th of 283 brands |
| Shares a login with | 16 other brands |
How to log in to a Wyse server or hardware device
- Wyse admins often use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
- With Wyse hardware, bIOS/firmware setup screen at boot
- On Wyse equipment, serial console or terminal server
Which login to try, in order:
- First, try username (blank) with password Fireport.
- If that fails, use username (blank) with password password (by satadru).
- Next, try username VNC with password winterm.
- Another option is username rapport with password r@p8p0r+.
- You can also try username root with password (blank).
- Last, try username root with password wyse.
Forgot the password? Reset your Wyse server or hardware device
- On the Wyse server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
- For management controllers: use the host OS utility or the controller’s physical reset.
- Follow the vendor’s documented recovery procedure.
Why you should change the Wyse default password
- With Wyse defaults unchanged, out-of-band controllers give full power, console and reinstall access.
- If a Wyse server keeps its factory login: firmware can be modified to persist malware.
- On an unprotected Wyse device, terminal servers expose consoles of many other devices.
How to change it: Wyse recommends changing the factory login at first setup. Set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.
Wyse default password FAQ
What is the default password for Wyse?
The most common default is "Fireport". All 6 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Wyse username?
Common default usernames are "(blank)", "root", "VNC", "rapport".
How do I log in to a Wyse server or hardware device?
Wyse admins often use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username (blank) with password Fireport.
The Wyse default password doesn't work: what now?
If (blank) / Fireport is rejected, someone changed it after installation. On the Wyse server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.
Is it safe to keep the Wyse default password?
No. With Wyse defaults unchanged, out-of-band controllers give full power, console and reinstall access. Wyse recommends changing the factory login at first setup. Set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.