Allied Telesyn Default Password
Switches & Enterprise Networking · 9 default logins · Updated
The most common default login for Allied Telesyn devices is username blank (leave it empty) and password blank (leave it empty). There are 9 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
(blank)- Known combinations
- 9
Looking for the default login of a Allied Telesyn switch or network device? Below are the documented factory credentials. Allied Telesyn has 9 documented default logins. The most common username is (blank) (3 entries) and the most common password is (blank) (3 entries).
Allied Telesyn default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (blank) | (blank) | Blank password | — |
| 2 | (blank) | manager | Common word | — |
| 3 | (blank) | admin | Common word | — |
| 4 | admin | (blank) | Blank password | — |
| 5 | manager | admin | Common word | — |
| 6 | manager | friend | Product-specific | — |
| 7 | manager | manager | Same as username | — |
| 8 | root | (blank) | Blank password | — |
| 9 | secoff | secoff | Same as username | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Allied Telesyn defaults tell you
- 3 of 9 entries use a blank password: leave the password field empty.
- 3 entries have no username: type only the password.
- 2 use the username as the password (for example manager / manager).
- Allied Telesyn has the 19th longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Allied Telesyn default login at a glance
| Brand | Allied Telesyn |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 9 |
| Unique usernames | 5 |
| Unique passwords | 5 |
| Blank passwords | 3 of 9 |
| List size rank | 19th of 283 brands |
| Shares a login with | 89 other brands |
| Also listed as | ALLIED |
How to log in to a Allied Telesyn switch or network device
- Allied Telesyn admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- With Allied Telesyn hardware, sSH or Telnet to the management IP
- On Allied Telesyn equipment, web management interface (HTTP/HTTPS) on managed models
- For a Allied Telesyn switch, sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username (blank) with password (blank).
- If that fails, use username (blank) with password manager.
- Next, try username (blank) with password admin.
- Another option is username admin with password (blank).
- You can also try username manager with password admin.
- Last, try username manager with password friend.
Forgot the password? Reset your Allied Telesyn switch or network device
- Allied Telesyn: connect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Allied Telesyn default password
- If a Allied Telesyn switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: To secure your Allied Telesyn switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
Allied Telesyn default password FAQ
What is the default password for Allied Telesyn?
The most common default is "(blank)". All 9 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Allied Telesyn username?
Common default usernames are "(blank)", "manager", "admin", "root".
How do I log in to a Allied Telesyn switch or network device?
Allied Telesyn admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password (blank).
The Allied Telesyn default password doesn't work: what now?
If (blank) / (blank) is rejected, someone changed it after installation. Allied Telesyn: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Allied Telesyn default password?
No. If a Allied Telesyn switch keeps its factory login: full control of VLANs, routing and traffic mirroring. To secure your Allied Telesyn switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.