Mitel Networks Default Password
Telephony, VoIP & Video Conferencing · 10 default logins · Updated
The most common default login for Mitel Networks devices is username "system" and password "sx2000". There are 10 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
system- Most common password
sx2000- Known combinations
- 10
This page lists the factory default usernames and passwords for Mitel Networks PBX systems, IP phones, VoIP gateways and video endpoints. Mitel Networks has 10 documented default logins. The most common username is system (3 entries) and the most common password is sx2000 (4 entries).
Mitel Networks default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (blank) | (blank) | Blank password | — |
| 2 | 1nstaller | 5X2000 | Product-specific | http://www.tek-tips.com/viewthread.cfm?qid=1036643 |
| 3 | installer | sx2000 | Product-specific | http://www.tek-tips.com/viewthread.cfm?qid=1036643 |
| 4 | maint1 | sx2000 | Product-specific | http://www.tek-tips.com/viewthread.cfm?qid=1036643 |
| 5 | maint2 | sx2000 | Product-specific | http://www.tek-tips.com/viewthread.cfm?qid=1036643 |
| 6 | s1stem | 5X2000 | Product-specific | http://www.tek-tips.com/viewthread.cfm?qid=1036643 |
| 7 | system | sx2000 | Product-specific | http://www.tek-tips.com/viewthread.cfm?qid=1036643 |
| 8 | installer | 1000 | Numeric PIN | — |
| 9 | system | mnet | Product-specific | — |
| 10 | system | password | Common word | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Mitel Networks defaults tell you
- 1 of 10 entries use a blank password: leave the password field empty.
- 1 entry has no username: type only the password.
- 1 is a numeric PIN, typical for keypads and service menus.
- 6 entries include a note on the product, access method or privilege level: check the Notes column.
- Mitel Networks has the 17th longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Mitel Networks default login at a glance
| Brand | Mitel Networks |
|---|---|
| Category | Telephony, VoIP & Video Conferencing |
| Known default logins | 10 |
| Unique usernames | 7 |
| Unique passwords | 6 |
| Blank passwords | 1 of 10 |
| List size rank | 17th of 283 brands |
| Shares a login with | 47 other brands |
How to log in to a Mitel Networks phone system or conferencing device
- On Mitel Networks equipment, web admin interface of the phone, gateway or codec
- For a Mitel Networks phone system, phone keypad admin menu (often using a numeric PIN)
- Many Mitel Networks models use telnet/SSH or the vendor’s management software
Which login to try, in order:
- First, try username (blank) with password (blank).
- If that fails, use username 1nstaller with password 5X2000 (http://www.tek-tips.com/viewthread.cfm?qid=1036643).
- Next, try username installer with password sx2000 (http://www.tek-tips.com/viewthread.cfm?qid=1036643).
- Another option is username maint1 with password sx2000 (http://www.tek-tips.com/viewthread.cfm?qid=1036643).
- You can also try username maint2 with password sx2000 (http://www.tek-tips.com/viewthread.cfm?qid=1036643).
- Last, try username s1stem with password 5X2000 (http://www.tek-tips.com/viewthread.cfm?qid=1036643).
Forgot the password? Reset your Mitel Networks phone system or conferencing device
- On IP phones use the keypad reset sequence or the Settings → Admin → Factory reset menu.
- On PBX/gateway hardware use the console or reset button.
- Re-provision the device from your phone system after the reset.
Why you should change the Mitel Networks default password
- If a Mitel Networks phone system keeps its factory login: toll fraud: attackers place expensive international calls through your system.
- On an unprotected Mitel Networks device, calls and voicemail can be intercepted.
- Risk for Mitel Networks owners: conference cameras and microphones can be turned on remotely.
How to change it: Replace (blank) / (blank) on every Mitel Networks device: change the admin password and the user/voicemail PINs, disable unused remote access and restrict SIP to known providers. Create a strong replacement with our password generator.
Mitel Networks default password FAQ
What is the default password for Mitel Networks?
The most common default is "sx2000". All 10 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Mitel Networks username?
Common default usernames are "system", "installer", "(blank)", "1nstaller".
How do I log in to a Mitel Networks phone system or conferencing device?
On Mitel Networks equipment, web admin interface of the phone, gateway or codec. On the login screen enter username (blank) with password (blank).
The Mitel Networks default password doesn't work: what now?
If (blank) / (blank) is rejected, someone changed it after installation. On IP phones use the keypad reset sequence or the Settings → Admin → Factory reset menu. On PBX/gateway hardware use the console or reset button.
Is it safe to keep the Mitel Networks default password?
No. If a Mitel Networks phone system keeps its factory login: toll fraud: attackers place expensive international calls through your system. Replace (blank) / (blank) on every Mitel Networks device: change the admin password and the user/voicemail PINs, disable unused remote access and restrict SIP to known providers.