Adtran Default Password
Switches & Enterprise Networking · 5 default logins · Updated
The most common default login for Adtran devices is username blank (leave it empty) and password "password". There are 5 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
password- Known combinations
- 5
Looking for the default login of a Adtran switch or network device? Below are the documented factory credentials. Adtran has 5 documented default logins. The most common username is (blank) (3 entries) and the most common password is password (2 entries).
Adtran default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | admin | password | Common word | — |
| 2 | (blank) | adtran | Vendor name | — |
| 3 | admin | password | Common word | http://www.adtran.com/pub/Library/Quick_Start_Guides/Public_View/NetVanta%203430%20Quick%20Start%20Guide.pdf |
| 4 | (blank) | (blank) | Blank password | — |
| 5 | (blank) | Password | Common word | CTRL-L |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Adtran defaults tell you
- 1 of 5 entries use a blank password: leave the password field empty.
- 3 entries have no username: type only the password.
- 2 entries include a note on the product, access method or privilege level: check the Notes column.
- Adtran has the 41st longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Adtran default login at a glance
| Brand | Adtran |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 5 |
| Unique usernames | 2 |
| Unique passwords | 4 |
| Blank passwords | 1 of 5 |
| List size rank | 41st of 283 brands |
| Shares a login with | 65 other brands |
How to log in to a Adtran switch or network device
- With Adtran hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- On Adtran equipment, sSH or Telnet to the management IP
- For a Adtran switch, web management interface (HTTP/HTTPS) on managed models
- Many Adtran models use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username admin with password password.
- If that fails, use username (blank) with password adtran.
- Next, try username admin with password password (http://www.adtran.com/pub/Library/Quick_Start_Guides/Public_View/NetVanta%203430%20Quick%20Start%20Guide.pdf).
- Another option is username (blank) with password (blank).
- You can also try username (blank) with password Password (CTRL-L).
Forgot the password? Reset your Adtran switch or network device
- undefinedConnect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Adtran default password
- undefinedfull control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: Create a strong replacement with our password generator.
Adtran default password FAQ
What is the default password for Adtran?
The most common default is "password". All 5 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Adtran username?
Common default usernames are "(blank)", "admin".
How do I log in to a Adtran switch or network device?
With Adtran hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username admin with password password.
The Adtran default password doesn't work: what now?
If admin / password is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Adtran default password?
No. undefinedfull control of VLANs, routing and traffic mirroring. undefined