Cabletron Default Password

Switches & Enterprise Networking · 2 default logins · Updated

Quick answer

The most common default login for Cabletron devices is username blank (leave it empty) and password blank (leave it empty). There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Looking for the default login of a Cabletron switch or network device? Below are the documented factory credentials. Cabletron has 2 documented default logins. The most common username is (blank) and the most common password is (blank) (2 entries).

Cabletron default username and password list

#UsernamePasswordTypeNotes
1(blank)(blank)Blank password—
2netman(blank)Blank password—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Cabletron defaults tell you

  • 2 of 2 entries use a blank password: leave the password field empty.
  • 1 entry has no username: type only the password.
  • Cabletron has the 101st longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.

Cabletron default login at a glance

BrandCabletron
CategorySwitches & Enterprise Networking
Known default logins2
Unique usernames2
Unique passwords1
Blank passwords2 of 2
List size rank101st of 283 brands
Shares a login with47 other brands

How to log in to a Cabletron switch or network device

  • For a Cabletron switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • Many Cabletron models use sSH or Telnet to the management IP
  • Cabletron admins often use web management interface (HTTP/HTTPS) on managed models
  • With Cabletron hardware, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password (blank).
  2. If that fails, use username netman with password (blank).

Forgot the password? Reset your Cabletron switch or network device

  1. Connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Cabletron default password

  • On an unprotected Cabletron device, full control of VLANs, routing and traffic mirroring.
  • Risk for Cabletron owners: default SNMP community strings ("public"/"private") leak or change configuration.
  • With Cabletron defaults unchanged, telnet sends credentials in clear text: use SSH.

How to change it: Cabletron recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Cabletron default password FAQ

What is the default password for Cabletron?

The most common default is "(blank)". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Cabletron username?

Common default usernames are "(blank)", "netman".

How do I log in to a Cabletron switch or network device?

For a Cabletron switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password (blank).

The Cabletron default password doesn't work: what now?

If (blank) / (blank) is rejected, someone changed it after installation. Connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Cabletron default password?

No. On an unprotected Cabletron device, full control of VLANs, routing and traffic mirroring. Cabletron recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.