Polycom Default Password

Telephony, VoIP & Video Conferencing · 7 default logins · Updated

Quick answer

The most common default login for Polycom devices is username blank (leave it empty) and password "456". There are 7 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

This page lists the factory default usernames and passwords for Polycom PBX systems, IP phones, VoIP gateways and video endpoints. Polycom has 7 documented default logins. The most common username is (blank) (4 entries) and the most common password is 456.

Polycom default username and password list

#UsernamePasswordTypeNotes
1(blank)(blank)Blank password—
2(blank)ACCORDProduct-specifichttp://www.polycom.com/common/pw_cmp_updateDocKeywords/0,1687,6312,00.pdf
3(blank)adminCommon word—
4(blank)x6zynd56Product-specific—
5Polycom456Numeric PINusername is case sensitive
6PolycomSpIpProduct-specific—
7administrator* * #Product-specific—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Polycom defaults tell you

  • 1 of 7 entries use a blank password: leave the password field empty.
  • 4 entries have no username: type only the password.
  • 1 is a numeric PIN, typical for keypads and service menus.
  • 2 entries include a note on the product, access method or privilege level: check the Notes column.
  • Polycom has the 29th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Product-specific4
Blank password1
Common word1
Numeric PIN1

Polycom default login at a glance

BrandPolycom
CategoryTelephony, VoIP & Video Conferencing
Known default logins7
Unique usernames3
Unique passwords7
Blank passwords1 of 7
List size rank29th of 283 brands
Shares a login with62 other brands

How to log in to a Polycom phone system or conferencing device

  • Polycom admins often use web admin interface of the phone, gateway or codec
  • With Polycom hardware, phone keypad admin menu (often using a numeric PIN)
  • On Polycom equipment, telnet/SSH or the vendor’s management software

Which login to try, in order:

  1. First, try username (blank) with password (blank).
  2. If that fails, use username (blank) with password ACCORD (http://www.polycom.com/common/pw_cmp_updateDocKeywords/0,1687,6312,00.pdf).
  3. Next, try username (blank) with password admin.
  4. Another option is username (blank) with password x6zynd56.
  5. You can also try username Polycom with password 456 (username is case sensitive).
  6. Last, try username Polycom with password SpIp.

Forgot the password? Reset your Polycom phone system or conferencing device

  1. undefinedOn IP phones use the keypad reset sequence or the Settings → Admin → Factory reset menu.
  2. On PBX/gateway hardware use the console or reset button.
  3. Re-provision the device from your phone system after the reset.

Why you should change the Polycom default password

  • undefinedtoll fraud: attackers place expensive international calls through your system.
  • If a Polycom phone system keeps its factory login: calls and voicemail can be intercepted.
  • undefinedconference cameras and microphones can be turned on remotely.

How to change it: To secure your Polycom phone system: change the admin password and the user/voicemail PINs, disable unused remote access and restrict SIP to known providers. Create a strong replacement with our password generator.

Polycom default password FAQ

What is the default password for Polycom?

The most common default is "456". All 7 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Polycom username?

Common default usernames are "(blank)", "Polycom", "administrator".

How do I log in to a Polycom phone system or conferencing device?

Polycom admins often use web admin interface of the phone, gateway or codec. On the login screen enter username (blank) with password (blank).

The Polycom default password doesn't work: what now?

If (blank) / (blank) is rejected, someone changed it after installation. undefinedOn IP phones use the keypad reset sequence or the Settings → Admin → Factory reset menu. On PBX/gateway hardware use the console or reset button.

Is it safe to keep the Polycom default password?

No. undefinedtoll fraud: attackers place expensive international calls through your system. To secure your Polycom phone system: change the admin password and the user/voicemail PINs, disable unused remote access and restrict SIP to known providers.