RM Default Password
Servers, Terminals & Hardware · 18 default logins · Updated
The most common default login for RM devices is username blank (leave it empty) and password "password". There are 18 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
password- Known combinations
- 18
This page lists the factory default usernames and passwords for RM servers, remote-management controllers, terminal servers and BIOS. RM has 18 documented default logins. The most common username is (blank) and the most common password is password (9 entries).
RM default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (blank) | RM | Vendor name | — |
| 2 | RMUser1 | password | Common word | — |
| 3 | admin | rmnetlm | Vendor name | — |
| 4 | admin2 | changeme | Common word | — |
| 5 | adminstrator | changeme | Common word | — |
| 6 | deskalt | password | Common word | — |
| 7 | deskman | changeme | Common word | — |
| 8 | desknorm | password | Common word | — |
| 9 | deskres | password | Common word | — |
| 10 | guest | (blank) | Blank password | — |
| 11 | replicator | replicator | Same as username | — |
| 12 | setup | changeme | Common word | — |
| 13 | teacher | password | Common word | — |
| 14 | temp1 | password | Common word | — |
| 15 | topicalt | password | Common word | — |
| 16 | topicnorm | password | Common word | — |
| 17 | topicres | password | Common word | — |
| 18 | administrator | password/changeme or secret | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these RM defaults tell you
- 1 of 18 entries use a blank password: leave the password field empty.
- 1 entry has no username: type only the password.
- 1 uses the username as the password (for example replicator / replicator).
- RM has the 8th longest default-credential list of the 283 vendors in our database.
- 1 other vendor uses at least one of the same username/password pairs, which is why attackers try these combinations first.
RM default login at a glance
| Brand | RM |
|---|---|
| Category | Servers, Terminals & Hardware |
| Known default logins | 18 |
| Unique usernames | 18 |
| Unique passwords | 7 |
| Blank passwords | 1 of 18 |
| List size rank | 8th of 283 brands |
| Shares a login with | 1 other brand |
How to log in to a RM server or hardware device
- For a RM server, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
- Many RM models use bIOS/firmware setup screen at boot
- RM admins often use serial console or terminal server
Which login to try, in order:
- First, try username (blank) with password RM.
- If that fails, use username RMUser1 with password password.
- Next, try username admin with password rmnetlm.
- Another option is username admin2 with password changeme.
- You can also try username adminstrator with password changeme.
- Last, try username deskalt with password password.
Forgot the password? Reset your RM server or hardware device
- For RM units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
- For management controllers: use the host OS utility or the controller’s physical reset.
- Follow the vendor’s documented recovery procedure.
Why you should change the RM default password
- Risk for RM owners: out-of-band controllers give full power, console and reinstall access.
- With RM defaults unchanged, firmware can be modified to persist malware.
- If a RM server keeps its factory login: terminal servers expose consoles of many other devices.
How to change it: To secure your RM server: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.
RM default password FAQ
What is the default password for RM?
The most common default is "password". All 18 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default RM username?
Common default usernames are "(blank)", "RMUser1", "admin", "admin2".
How do I log in to a RM server or hardware device?
For a RM server, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username (blank) with password RM.
The RM default password doesn't work: what now?
If (blank) / RM is rejected, someone changed it after installation. For RM units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.
Is it safe to keep the RM default password?
No. Risk for RM owners: out-of-band controllers give full power, console and reinstall access. To secure your RM server: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.