Wang Default Password
Servers, Terminals & Hardware · 1 default login · Updated
The most common default login for Wang devices is username "CSG" and password "SESAME". This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
CSG- Most common password
SESAME- Known combinations
- 1
Wang ships many of its servers, remote-management controllers, terminal servers and BIOS with publicly known default credentials, collected below. Wang has one documented default login: username CSG with password SESAME.
Wang default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | CSG | SESAME | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Wang defaults tell you
- 1 other vendor uses at least one of the same username/password pairs, which is why attackers try these combinations first.
Wang default login at a glance
| Brand | Wang |
|---|---|
| Category | Servers, Terminals & Hardware |
| Known default logins | 1 |
| Unique usernames | 1 |
| Unique passwords | 1 |
| Blank passwords | 0 of 1 |
| List size rank | 278th of 283 brands |
| Shares a login with | 1 other brand |
How to log in to a Wang server or hardware device
- Many Wang models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
- Wang admins often use bIOS/firmware setup screen at boot
- With Wang hardware, serial console or terminal server
Which login to try, in order:
- First, try username CSG with password SESAME.
Forgot the password? Reset your Wang server or hardware device
- On the Wang server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
- For management controllers: use the host OS utility or the controller’s physical reset.
- Follow the vendor’s documented recovery procedure.
Why you should change the Wang default password
- If a Wang server keeps its factory login: out-of-band controllers give full power, console and reinstall access.
- On an unprotected Wang device, firmware can be modified to persist malware.
- Risk for Wang owners: terminal servers expose consoles of many other devices.
How to change it: Wang recommends changing the factory login at first setup. Set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.
Wang default password FAQ
What is the default password for Wang?
The documented default is username "CSG" with password "SESAME".
What is the default Wang username?
The default username is "CSG".
How do I log in to a Wang server or hardware device?
Many Wang models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username CSG with password SESAME.
The Wang default password doesn't work: what now?
If CSG / SESAME is rejected, someone changed it after installation. On the Wang server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.
Is it safe to keep the Wang default password?
No. If a Wang server keeps its factory login: out-of-band controllers give full power, console and reinstall access. Wang recommends changing the factory login at first setup. Set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.