Tandem Default Password
Servers, Terminals & Hardware · 2 default logins · Updated
The most common default login for Tandem devices is username "super.super" and password blank (leave it empty). There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
super.super- Most common password
(blank)- Known combinations
- 2
Tandem ships many of its servers, remote-management controllers, terminal servers and BIOS with publicly known default credentials, collected below. Tandem has 2 documented default logins. The most common username is super.super (2 entries) and the most common password is (blank).
Tandem default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | super.super | (blank) | Blank password | — |
| 2 | super.super | master | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Tandem defaults tell you
- 1 of 2 entries use a blank password: leave the password field empty.
- Tandem has the 137th longest default-credential list of the 283 vendors in our database.
Tandem default login at a glance
| Brand | Tandem |
|---|---|
| Category | Servers, Terminals & Hardware |
| Known default logins | 2 |
| Unique usernames | 1 |
| Unique passwords | 2 |
| Blank passwords | 1 of 2 |
| List size rank | 137th of 283 brands |
| Shares a login with | No other brand |
How to log in to a Tandem server or hardware device
- Many Tandem models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
- Tandem admins often use bIOS/firmware setup screen at boot
- With Tandem hardware, serial console or terminal server
Which login to try, in order:
- First, try username super.super with password (blank).
- If that fails, use username super.super with password master.
Forgot the password? Reset your Tandem server or hardware device
- For Tandem units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
- For management controllers: use the host OS utility or the controller’s physical reset.
- Follow the vendor’s documented recovery procedure.
Why you should change the Tandem default password
- Risk for Tandem owners: out-of-band controllers give full power, console and reinstall access.
- With Tandem defaults unchanged, firmware can be modified to persist malware.
- If a Tandem server keeps its factory login: terminal servers expose consoles of many other devices.
How to change it: Replace super.super / (blank) on every Tandem device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.
Tandem default password FAQ
What is the default password for Tandem?
The most common default is "(blank)". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Tandem username?
The default username is "super.super".
How do I log in to a Tandem server or hardware device?
Many Tandem models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username super.super with password (blank).
The Tandem default password doesn't work: what now?
If super.super / (blank) is rejected, someone changed it after installation. For Tandem units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.
Is it safe to keep the Tandem default password?
No. Risk for Tandem owners: out-of-band controllers give full power, console and reinstall access. Replace super.super / (blank) on every Tandem device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.