Unisys Default Password

Servers, Terminals & Hardware · 3 default logins · Updated

Quick answer

The most common default login for Unisys devices is username "ADMINISTRATOR" and password "ADMINISTRATOR". There are 3 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Unisys ships many of its servers, remote-management controllers, terminal servers and BIOS with publicly known default credentials, collected below. Unisys has 3 documented default logins. The most common username is ADMINISTRATOR and the most common password is ADMINISTRATOR.

Unisys default username and password list

#UsernamePasswordTypeNotes
1ADMINISTRATORADMINISTRATORSame as username—
2HTTPHTTPSame as username—
3NAUNAUSame as username—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Unisys defaults tell you

  • 3 use the username as the password (for example ADMINISTRATOR / ADMINISTRATOR).
  • Unisys has the 93rd longest default-credential list of the 283 vendors in our database.
  • 1 other vendor uses at least one of the same username/password pairs, which is why attackers try these combinations first.
Same as username3

Unisys default login at a glance

BrandUnisys
CategoryServers, Terminals & Hardware
Known default logins3
Unique usernames3
Unique passwords3
Blank passwords0 of 3
List size rank93rd of 283 brands
Shares a login with1 other brand

How to log in to a Unisys server or hardware device

  • For a Unisys server, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
  • Many Unisys models use bIOS/firmware setup screen at boot
  • Unisys admins often use serial console or terminal server

Which login to try, in order:

  1. First, try username ADMINISTRATOR with password ADMINISTRATOR.
  2. If that fails, use username HTTP with password HTTP.
  3. Next, try username NAU with password NAU.

Forgot the password? Reset your Unisys server or hardware device

  1. On the Unisys server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
  2. For management controllers: use the host OS utility or the controller’s physical reset.
  3. Follow the vendor’s documented recovery procedure.

Why you should change the Unisys default password

  • If a Unisys server keeps its factory login: out-of-band controllers give full power, console and reinstall access.
  • On an unprotected Unisys device, firmware can be modified to persist malware.
  • Risk for Unisys owners: terminal servers expose consoles of many other devices.

How to change it: Replace ADMINISTRATOR / ADMINISTRATOR on every Unisys device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.

Unisys default password FAQ

What is the default password for Unisys?

The most common default is "ADMINISTRATOR". All 3 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Unisys username?

Common default usernames are "ADMINISTRATOR", "HTTP", "NAU".

How do I log in to a Unisys server or hardware device?

For a Unisys server, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username ADMINISTRATOR with password ADMINISTRATOR.

The Unisys default password doesn't work: what now?

If ADMINISTRATOR / ADMINISTRATOR is rejected, someone changed it after installation. On the Unisys server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.

Is it safe to keep the Unisys default password?

No. If a Unisys server keeps its factory login: out-of-band controllers give full power, console and reinstall access. Replace ADMINISTRATOR / ADMINISTRATOR on every Unisys device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.