Sun Microsystems Default Password

Servers, Terminals & Hardware · 5 default logins · Updated

Quick answer

The most common default login for Sun Microsystems devices is username "root" and password "sun123". There are 5 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Sun Microsystems ships many of its servers, remote-management controllers, terminal servers and BIOS with publicly known default credentials, collected below. Sun Microsystems has 5 documented default logins. The most common username is root (3 entries) and the most common password is sun123.

Sun Microsystems default username and password list

#UsernamePasswordTypeNotes
1rootsun123Product-specific—
2adminadminSame as usernamesubmit by Nabil Ouchn
3rootchangemeCommon word—
4roott00lk1tProduct-specific—
5sspsspSame as username—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Sun Microsystems defaults tell you

  • 2 use the username as the password (for example admin / admin).
  • 1 entry includes a note on the product, access method or privilege level: check the Notes column.
  • Sun Microsystems has the 49th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Product-specific2
Same as username2
Common word1

Sun Microsystems default login at a glance

BrandSun Microsystems
CategoryServers, Terminals & Hardware
Known default logins5
Unique usernames3
Unique passwords5
Blank passwords0 of 5
List size rank49th of 283 brands
Shares a login with61 other brands
Also listed asSUN

How to log in to a Sun Microsystems server or hardware device

  • Many Sun Microsystems models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
  • Sun Microsystems admins often use bIOS/firmware setup screen at boot
  • With Sun Microsystems hardware, serial console or terminal server

Which login to try, in order:

  1. First, try username root with password sun123.
  2. If that fails, use username admin with password admin (submit by Nabil Ouchn).
  3. Next, try username root with password changeme.
  4. Another option is username root with password t00lk1t.
  5. You can also try username ssp with password ssp.

Forgot the password? Reset your Sun Microsystems server or hardware device

  1. For Sun Microsystems units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
  2. For management controllers: use the host OS utility or the controller’s physical reset.
  3. Follow the vendor’s documented recovery procedure.

Why you should change the Sun Microsystems default password

  • With Sun Microsystems defaults unchanged, out-of-band controllers give full power, console and reinstall access.
  • If a Sun Microsystems server keeps its factory login: firmware can be modified to persist malware.
  • On an unprotected Sun Microsystems device, terminal servers expose consoles of many other devices.

How to change it: To secure your Sun Microsystems server: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.

Sun Microsystems default password FAQ

What is the default password for Sun Microsystems?

The most common default is "sun123". All 5 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Sun Microsystems username?

Common default usernames are "root", "admin", "ssp".

How do I log in to a Sun Microsystems server or hardware device?

Many Sun Microsystems models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username root with password sun123.

The Sun Microsystems default password doesn't work: what now?

If root / sun123 is rejected, someone changed it after installation. For Sun Microsystems units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.

Is it safe to keep the Sun Microsystems default password?

No. With Sun Microsystems defaults unchanged, out-of-band controllers give full power, console and reinstall access. To secure your Sun Microsystems server: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.