Visual Networks Default Password

Switches & Enterprise Networking · 1 default login · Updated

Quick answer

The most common default login for Visual Networks devices is username "admin" and password "visual". This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Use this reference to log in to a Visual Networks switch or network device that is still on its factory settings. Visual Networks has one documented default login: username admin with password visual.

Visual Networks default username and password list

#UsernamePasswordTypeNotes
1adminvisualVendor name—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

Visual Networks default login at a glance

BrandVisual Networks
CategorySwitches & Enterprise Networking
Known default logins1
Unique usernames1
Unique passwords1
Blank passwords0 of 1
List size rank275th of 283 brands
Shares a login withNo other brand

How to log in to a Visual Networks switch or network device

  • Visual Networks admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • With Visual Networks hardware, sSH or Telnet to the management IP
  • On Visual Networks equipment, web management interface (HTTP/HTTPS) on managed models
  • For a Visual Networks switch, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username admin with password visual.

Forgot the password? Reset your Visual Networks switch or network device

  1. Connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Visual Networks default password

  • If a Visual Networks switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
  • On an unprotected Visual Networks device, default SNMP community strings ("public"/"private") leak or change configuration.
  • Risk for Visual Networks owners: telnet sends credentials in clear text: use SSH.

How to change it: To secure your Visual Networks switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Visual Networks default password FAQ

What is the default password for Visual Networks?

The documented default is username "admin" with password "visual".

What is the default Visual Networks username?

The default username is "admin".

How do I log in to a Visual Networks switch or network device?

Visual Networks admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username admin with password visual.

The Visual Networks default password doesn't work: what now?

If admin / visual is rejected, someone changed it after installation. Connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Visual Networks default password?

No. If a Visual Networks switch keeps its factory login: full control of VLANs, routing and traffic mirroring. To secure your Visual Networks switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.