Xyplex Default Password

Switches & Enterprise Networking · 4 default logins · Updated

Quick answer

The most common default login for Xyplex devices is username blank (leave it empty) and password "system". There are 4 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Use this reference to log in to a Xyplex switch or network device that is still on its factory settings. Xyplex has 4 documented default logins. The most common username is (blank) (3 entries) and the most common password is system (2 entries).

Xyplex default username and password list

#UsernamePasswordTypeNotes
1(blank)accessCommon word—
2(blank)systemCommon word—
3(blank)(blank)Blank password—
4setprivsystemCommon word—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Xyplex defaults tell you

  • 1 of 4 entries use a blank password: leave the password field empty.
  • 3 entries have no username: type only the password.
  • Xyplex has the 71st longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Common word3
Blank password1

Xyplex default login at a glance

BrandXyplex
CategorySwitches & Enterprise Networking
Known default logins4
Unique usernames2
Unique passwords3
Blank passwords1 of 4
List size rank71st of 283 brands
Shares a login with49 other brands

How to log in to a Xyplex switch or network device

  • Many Xyplex models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • Xyplex admins often use sSH or Telnet to the management IP
  • With Xyplex hardware, web management interface (HTTP/HTTPS) on managed models
  • On Xyplex equipment, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password access.
  2. If that fails, use username (blank) with password system.
  3. Next, try username (blank) with password (blank).
  4. Another option is username setpriv with password system.

Forgot the password? Reset your Xyplex switch or network device

  1. Xyplex: connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Xyplex default password

  • If a Xyplex switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
  • On an unprotected Xyplex device, default SNMP community strings ("public"/"private") leak or change configuration.
  • Risk for Xyplex owners: telnet sends credentials in clear text: use SSH.

How to change it: Xyplex recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Xyplex default password FAQ

What is the default password for Xyplex?

The most common default is "system". All 4 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Xyplex username?

Common default usernames are "(blank)", "setpriv".

How do I log in to a Xyplex switch or network device?

Many Xyplex models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password access.

The Xyplex default password doesn't work: what now?

If (blank) / access is rejected, someone changed it after installation. Xyplex: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Xyplex default password?

No. If a Xyplex switch keeps its factory login: full control of VLANs, routing and traffic mirroring. Xyplex recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.