Verilink Default Password

Switches & Enterprise Networking · 1 default login · Updated

Quick answer

The most common default login for Verilink devices is username blank (leave it empty) and password blank (leave it empty). This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Looking for the default login of a Verilink switch or network device? Below are the documented factory credentials. Verilink has one documented default login: username (blank) with password (blank).

Verilink default username and password list

#UsernamePasswordTypeNotes
1(blank)(blank)Blank password—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Verilink defaults tell you

  • 1 of 1 entry uses a blank password: leave the password field empty.
  • 1 entry has no username: type only the password.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.

Verilink default login at a glance

BrandVerilink
CategorySwitches & Enterprise Networking
Known default logins1
Unique usernames1
Unique passwords1
Blank passwords1 of 1
List size rank274th of 283 brands
Shares a login with47 other brands

How to log in to a Verilink switch or network device

  • Many Verilink models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • Verilink admins often use sSH or Telnet to the management IP
  • With Verilink hardware, web management interface (HTTP/HTTPS) on managed models
  • On Verilink equipment, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password (blank).

Forgot the password? Reset your Verilink switch or network device

  1. Verilink: connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Verilink default password

  • On an unprotected Verilink device, full control of VLANs, routing and traffic mirroring.
  • Risk for Verilink owners: default SNMP community strings ("public"/"private") leak or change configuration.
  • With Verilink defaults unchanged, telnet sends credentials in clear text: use SSH.

How to change it: Verilink recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Verilink default password FAQ

What is the default password for Verilink?

The documented default is username "(blank)" with password "(blank)".

What is the default Verilink username?

The default username is "(blank)".

How do I log in to a Verilink switch or network device?

Many Verilink models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password (blank).

The Verilink default password doesn't work: what now?

If (blank) / (blank) is rejected, someone changed it after installation. Verilink: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Verilink default password?

No. On an unprotected Verilink device, full control of VLANs, routing and traffic mirroring. Verilink recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.