Telco Systems Default Password

Switches & Enterprise Networking · 1 default login · Updated

Quick answer

The most common default login for Telco Systems devices is username "telco" and password "telco". This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Use this reference to log in to a Telco Systems switch or network device that is still on its factory settings. Telco Systems has one documented default login: username telco with password telco.

Telco Systems default username and password list

#UsernamePasswordTypeNotes
1telcotelcoSame as username—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Telco Systems defaults tell you

  • 1 uses the username as the password (for example telco / telco).

Telco Systems default login at a glance

BrandTelco Systems
CategorySwitches & Enterprise Networking
Known default logins1
Unique usernames1
Unique passwords1
Blank passwords0 of 1
List size rank264th of 283 brands
Shares a login withNo other brand

How to log in to a Telco Systems switch or network device

  • For a Telco Systems switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • Many Telco Systems models use sSH or Telnet to the management IP
  • Telco Systems admins often use web management interface (HTTP/HTTPS) on managed models
  • With Telco Systems hardware, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username telco with password telco.

Forgot the password? Reset your Telco Systems switch or network device

  1. On the Telco Systems switch, connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Telco Systems default password

  • Risk for Telco Systems owners: full control of VLANs, routing and traffic mirroring.
  • With Telco Systems defaults unchanged, default SNMP community strings ("public"/"private") leak or change configuration.
  • If a Telco Systems switch keeps its factory login: telnet sends credentials in clear text: use SSH.

How to change it: To secure your Telco Systems switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Telco Systems default password FAQ

What is the default password for Telco Systems?

The documented default is username "telco" with password "telco".

What is the default Telco Systems username?

The default username is "telco".

How do I log in to a Telco Systems switch or network device?

For a Telco Systems switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username telco with password telco.

The Telco Systems default password doesn't work: what now?

If telco / telco is rejected, someone changed it after installation. On the Telco Systems switch, connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Telco Systems default password?

No. Risk for Telco Systems owners: full control of VLANs, routing and traffic mirroring. To secure your Telco Systems switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.