SmartSwitch Default Password
Switches & Enterprise Networking · 1 default login · Updated
The most common default login for SmartSwitch devices is username "admin" and password blank (leave it empty). This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
admin- Most common password
(blank)- Known combinations
- 1
SmartSwitch ships many of its switches, enterprise routers and network equipment with publicly known default credentials, collected below. SmartSwitch has one documented default login: username admin with password (blank).
SmartSwitch default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | admin | (blank) | Blank password | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these SmartSwitch defaults tell you
- 1 of 1 entry uses a blank password: leave the password field empty.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
SmartSwitch default login at a glance
| Brand | SmartSwitch |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 1 |
| Unique usernames | 1 |
| Unique passwords | 1 |
| Blank passwords | 1 of 1 |
| List size rank | 252nd of 283 brands |
| Shares a login with | 33 other brands |
How to log in to a SmartSwitch switch or network device
- For a SmartSwitch switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- Many SmartSwitch models use sSH or Telnet to the management IP
- SmartSwitch admins often use web management interface (HTTP/HTTPS) on managed models
- With SmartSwitch hardware, sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username admin with password (blank).
Forgot the password? Reset your SmartSwitch switch or network device
- undefinedConnect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the SmartSwitch default password
- undefinedfull control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- If a SmartSwitch switch keeps its factory login: telnet sends credentials in clear text: use SSH.
How to change it: Create a strong replacement with our password generator.
SmartSwitch default password FAQ
What is the default password for SmartSwitch?
The documented default is username "admin" with password "(blank)".
What is the default SmartSwitch username?
The default username is "admin".
How do I log in to a SmartSwitch switch or network device?
For a SmartSwitch switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username admin with password (blank).
The SmartSwitch default password doesn't work: what now?
If admin / (blank) is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the SmartSwitch default password?
No. undefinedfull control of VLANs, routing and traffic mirroring. undefined