Tellabs Default Password

Switches & Enterprise Networking · 2 default logins · Updated

Quick answer

The most common default login for Tellabs devices is username "root" and password "admin_1". There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Tellabs ships many of its switches, enterprise routers and network equipment with publicly known default credentials, collected below. Tellabs has 2 documented default logins. The most common username is root and the most common password is admin_1.

Tellabs default username and password list

#UsernamePasswordTypeNotes
1rootadmin_1Product-specifictelnet on port 3083
2tellabstellabs#1Vendor name—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Tellabs defaults tell you

  • 1 entry includes a note on the product, access method or privilege level: check the Notes column.
  • Tellabs has the 140th longest default-credential list of the 283 vendors in our database.

Tellabs default login at a glance

BrandTellabs
CategorySwitches & Enterprise Networking
Known default logins2
Unique usernames2
Unique passwords2
Blank passwords0 of 2
List size rank140th of 283 brands
Shares a login withNo other brand

How to log in to a Tellabs switch or network device

  • Tellabs admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • With Tellabs hardware, sSH or Telnet to the management IP
  • On Tellabs equipment, web management interface (HTTP/HTTPS) on managed models
  • For a Tellabs switch, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username root with password admin_1 (telnet on port 3083).
  2. If that fails, use username tellabs with password tellabs#1.

Forgot the password? Reset your Tellabs switch or network device

  1. Connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Tellabs default password

  • On an unprotected Tellabs device, full control of VLANs, routing and traffic mirroring.
  • Risk for Tellabs owners: default SNMP community strings ("public"/"private") leak or change configuration.
  • With Tellabs defaults unchanged, telnet sends credentials in clear text: use SSH.

How to change it: Replace root / admin_1 on every Tellabs device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Tellabs default password FAQ

What is the default password for Tellabs?

The most common default is "admin_1". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Tellabs username?

Common default usernames are "root", "tellabs".

How do I log in to a Tellabs switch or network device?

Tellabs admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username root with password admin_1 (telnet on port 3083).

The Tellabs default password doesn't work: what now?

If root / admin_1 is rejected, someone changed it after installation. Connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Tellabs default password?

No. On an unprotected Tellabs device, full control of VLANs, routing and traffic mirroring. Replace root / admin_1 on every Tellabs device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.