Accton Default Password

Switches & Enterprise Networking · 6 default logins · Updated

Quick answer

The most common default login for Accton devices is username blank (leave it empty) and password "0". There are 6 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Use this reference to log in to a Accton switch or network device that is still on its factory settings. Accton has 6 documented default logins. The most common username is (blank) and the most common password is 0.

Accton default username and password list

#UsernamePasswordTypeNotes
1(blank)0000Numeric PIN—
2__super(caclulated)Product-specifichttp://www.vettebak.nl/hak/
3admin(blank)Blank password—
4managermanagerSame as username—
5monitormonitorSame as username—
6none0Numeric PIN—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Accton defaults tell you

  • 1 of 6 entries use a blank password: leave the password field empty.
  • 1 entry has no username: type only the password.
  • 2 use the username as the password (for example manager / manager).
  • 2 are numeric PINs, typical for keypads and service menus.
  • 1 entry includes a note on the product, access method or privilege level: check the Notes column.
  • Accton has the 32nd longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Numeric PIN2
Same as username2
Product-specific1
Blank password1

Accton default login at a glance

BrandAccton
CategorySwitches & Enterprise Networking
Known default logins6
Unique usernames6
Unique passwords6
Blank passwords1 of 6
List size rank32nd of 283 brands
Shares a login with34 other brands

How to log in to a Accton switch or network device

  • With Accton hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • On Accton equipment, sSH or Telnet to the management IP
  • For a Accton switch, web management interface (HTTP/HTTPS) on managed models
  • Many Accton models use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password 0000.
  2. If that fails, use username __super with password (caclulated) (http://www.vettebak.nl/hak/).
  3. Next, try username admin with password (blank).
  4. Another option is username manager with password manager.
  5. You can also try username monitor with password monitor.
  6. Last, try username none with password 0.

Forgot the password? Reset your Accton switch or network device

  1. undefinedConnect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Accton default password

  • If a Accton switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
  • undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
  • undefinedtelnet sends credentials in clear text: use SSH.

How to change it: To secure your Accton switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Accton default password FAQ

What is the default password for Accton?

The most common default is "0". All 6 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Accton username?

Common default usernames are "(blank)", "__super", "admin", "manager".

How do I log in to a Accton switch or network device?

With Accton hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password 0000.

The Accton default password doesn't work: what now?

If (blank) / 0000 is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Accton default password?

No. If a Accton switch keeps its factory login: full control of VLANs, routing and traffic mirroring. To secure your Accton switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.