ADC Kentrox Default Password
Switches & Enterprise Networking · 1 default login · Updated
The most common default login for ADC Kentrox devices is username blank (leave it empty) and password "secret". This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
secret- Known combinations
- 1
Use this reference to log in to a ADC Kentrox switch or network device that is still on its factory settings. ADC Kentrox has one documented default login: username (blank) with password secret.
ADC Kentrox default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (blank) | secret | Common word | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these ADC Kentrox defaults tell you
- 1 entry has no username: type only the password.
ADC Kentrox default login at a glance
| Brand | ADC Kentrox |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 1 |
| Unique usernames | 1 |
| Unique passwords | 1 |
| Blank passwords | 0 of 1 |
| List size rank | 152nd of 283 brands |
| Shares a login with | No other brand |
How to log in to a ADC Kentrox switch or network device
- On ADC Kentrox equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- For a ADC Kentrox switch, sSH or Telnet to the management IP
- Many ADC Kentrox models use web management interface (HTTP/HTTPS) on managed models
- ADC Kentrox admins often use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username (blank) with password secret.
Forgot the password? Reset your ADC Kentrox switch or network device
- On the ADC Kentrox switch, connect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the ADC Kentrox default password
- With ADC Kentrox defaults unchanged, full control of VLANs, routing and traffic mirroring.
- If a ADC Kentrox switch keeps its factory login: default SNMP community strings ("public"/"private") leak or change configuration.
- On an unprotected ADC Kentrox device, telnet sends credentials in clear text: use SSH.
How to change it: To secure your ADC Kentrox switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
ADC Kentrox default password FAQ
What is the default password for ADC Kentrox?
The documented default is username "(blank)" with password "secret".
What is the default ADC Kentrox username?
The default username is "(blank)".
How do I log in to a ADC Kentrox switch or network device?
On ADC Kentrox equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password secret.
The ADC Kentrox default password doesn't work: what now?
If (blank) / secret is rejected, someone changed it after installation. On the ADC Kentrox switch, connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the ADC Kentrox default password?
No. With ADC Kentrox defaults unchanged, full control of VLANs, routing and traffic mirroring. To secure your ADC Kentrox switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.