ALAXALA Default Password
Switches & Enterprise Networking · 1 default login · Updated
The most common default login for ALAXALA devices is username "operator" and password blank (leave it empty). This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
operator- Most common password
(blank)- Known combinations
- 1
Use this reference to log in to a ALAXALA switch or network device that is still on its factory settings. ALAXALA has one documented default login: username operator with password (blank).
ALAXALA default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | operator | (blank) | Blank password | AX2300S and other AX switches at initial deployment: set an admin password and remove the operator user (source: ALAXALA Configuration Guide) |
"(blank)" means leave the field empty. Source: manufacturer manuals and public router databases (listed in the Notes column). Defaults can differ by model and firmware: check the label on your device.
What these ALAXALA defaults tell you
- 1 of 1 entry uses a blank password: leave the password field empty.
- 1 entry includes a note on the product, access method or privilege level: check the Notes column.
- 2 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
ALAXALA default login at a glance
| Brand | ALAXALA |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 1 |
| Unique usernames | 1 |
| Unique passwords | 1 |
| Blank passwords | 1 of 1 |
| List size rank | 156th of 283 brands |
| Shares a login with | 2 other brands |
How to log in to a ALAXALA switch or network device
- For a ALAXALA switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- Many ALAXALA models use sSH or Telnet to the management IP
- ALAXALA admins often use web management interface (HTTP/HTTPS) on managed models
- With ALAXALA hardware, sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username operator with password (blank) (AX2300S and other AX switches at initial deployment: set an admin password and remove the operator user (source: ALAXALA Configuration Guide)).
Forgot the password? Reset your ALAXALA switch or network device
- ALAXALA: connect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the ALAXALA default password
- With ALAXALA defaults unchanged, full control of VLANs, routing and traffic mirroring.
- If a ALAXALA switch keeps its factory login: default SNMP community strings ("public"/"private") leak or change configuration.
- On an unprotected ALAXALA device, telnet sends credentials in clear text: use SSH.
How to change it: To secure your ALAXALA switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
ALAXALA default password FAQ
What is the default password for ALAXALA?
The documented default is username "operator" with password "(blank)".
What is the default ALAXALA username?
The default username is "operator".
How do I log in to a ALAXALA switch or network device?
For a ALAXALA switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username operator with password (blank) (AX2300S and other AX switches at initial deployment: set an admin password and remove the operator user (source: ALAXALA Configuration Guide)).
The ALAXALA default password doesn't work: what now?
If operator / (blank) is rejected, someone changed it after installation. ALAXALA: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the ALAXALA default password?
No. With ALAXALA defaults unchanged, full control of VLANs, routing and traffic mirroring. To secure your ALAXALA switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.