Enterasys Default Password
Switches & Enterprise Networking · 4 default logins · Updated
The most common default login for Enterasys devices is username "admin" and password "netadmin". There are 4 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
admin- Most common password
netadmin- Known combinations
- 4
Looking for the default login of a Enterasys switch or network device? Below are the documented factory credentials. Enterasys has 4 documented default logins. The most common username is admin (2 entries) and the most common password is netadmin (2 entries).
Enterasys default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (blank) | netadmin | Product-specific | — |
| 2 | admin | (blank) | Blank password | — |
| 3 | admin | netadmin | Product-specific | — |
| 4 | tiger | tiger123 | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Enterasys defaults tell you
- 1 of 4 entries use a blank password: leave the password field empty.
- 1 entry has no username: type only the password.
- Enterasys has the 61st longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Enterasys default login at a glance
| Brand | Enterasys |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 4 |
| Unique usernames | 3 |
| Unique passwords | 3 |
| Blank passwords | 1 of 4 |
| List size rank | 61st of 283 brands |
| Shares a login with | 33 other brands |
How to log in to a Enterasys switch or network device
- With Enterasys hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- On Enterasys equipment, sSH or Telnet to the management IP
- For a Enterasys switch, web management interface (HTTP/HTTPS) on managed models
- Many Enterasys models use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username (blank) with password netadmin.
- If that fails, use username admin with password (blank).
- Next, try username admin with password netadmin.
- Another option is username tiger with password tiger123.
Forgot the password? Reset your Enterasys switch or network device
- undefinedConnect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Enterasys default password
- undefinedfull control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: To secure your Enterasys switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
Enterasys default password FAQ
What is the default password for Enterasys?
The most common default is "netadmin". All 4 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Enterasys username?
Common default usernames are "admin", "(blank)", "tiger".
How do I log in to a Enterasys switch or network device?
With Enterasys hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password netadmin.
The Enterasys default password doesn't work: what now?
If (blank) / netadmin is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Enterasys default password?
No. undefinedfull control of VLANs, routing and traffic mirroring. To secure your Enterasys switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.