Bay Networks Default Password

Switches & Enterprise Networking · 4 default logins · Updated

Quick answer

The most common default login for Bay Networks devices is username blank (leave it empty) and password blank (leave it empty). There are 4 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Looking for the default login of a Bay Networks switch or network device? Below are the documented factory credentials. Bay Networks has 4 documented default logins. The most common username is (blank) and the most common password is (blank) (2 entries).

Bay Networks default username and password list

#UsernamePasswordTypeNotes
1(blank)NetICsProduct-specific—
2Manager(blank)Blank password—
3User(blank)Blank password—
4securitysecuritySame as username—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Bay Networks defaults tell you

  • 2 of 4 entries use a blank password: leave the password field empty.
  • 1 entry has no username: type only the password.
  • 1 uses the username as the password (for example security / security).
  • Bay Networks has the 54th longest default-credential list of the 283 vendors in our database.
  • 2 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Blank password2
Product-specific1
Same as username1

Bay Networks default login at a glance

BrandBay Networks
CategorySwitches & Enterprise Networking
Known default logins4
Unique usernames4
Unique passwords3
Blank passwords2 of 4
List size rank54th of 283 brands
Shares a login with2 other brands

How to log in to a Bay Networks switch or network device

  • On Bay Networks equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • For a Bay Networks switch, sSH or Telnet to the management IP
  • Many Bay Networks models use web management interface (HTTP/HTTPS) on managed models
  • Bay Networks admins often use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password NetICs.
  2. If that fails, use username Manager with password (blank).
  3. Next, try username User with password (blank).
  4. Another option is username security with password security.

Forgot the password? Reset your Bay Networks switch or network device

  1. Connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Bay Networks default password

  • On an unprotected Bay Networks device, full control of VLANs, routing and traffic mirroring.
  • Risk for Bay Networks owners: default SNMP community strings ("public"/"private") leak or change configuration.
  • With Bay Networks defaults unchanged, telnet sends credentials in clear text: use SSH.

How to change it: Replace (blank) / NetICs on every Bay Networks device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Bay Networks default password FAQ

What is the default password for Bay Networks?

The most common default is "(blank)". All 4 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Bay Networks username?

Common default usernames are "(blank)", "Manager", "User", "security".

How do I log in to a Bay Networks switch or network device?

On Bay Networks equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password NetICs.

The Bay Networks default password doesn't work: what now?

If (blank) / NetICs is rejected, someone changed it after installation. Connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Bay Networks default password?

No. On an unprotected Bay Networks device, full control of VLANs, routing and traffic mirroring. Replace (blank) / NetICs on every Bay Networks device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.