Brocade Default Password

Switches & Enterprise Networking · 7 default logins · Updated

Quick answer

The most common default login for Brocade devices is username "root" and password "password". There are 7 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Looking for the default login of a Brocade switch or network device? Below are the documented factory credentials. Brocade has 7 documented default logins. The most common username is root (3 entries) and the most common password is password (2 entries).

Brocade default username and password list

#UsernamePasswordTypeNotes
1adminbrocade1Vendor name—
2adminpasswordCommon word—
3factoryFact4EMCProduct-specific—
4rootServ4EMCProduct-specific—
5rootfibranneProduct-specific—
6rootfivranneProduct-specificby Nicolas Gregoire
7userpasswordCommon wordAlso on other SAN equipment

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Brocade defaults tell you

  • 2 entries include a note on the product, access method or privilege level: check the Notes column.
  • Brocade has the 24th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Product-specific4
Common word2
Vendor name1

Brocade default login at a glance

BrandBrocade
CategorySwitches & Enterprise Networking
Known default logins7
Unique usernames4
Unique passwords6
Blank passwords0 of 7
List size rank24th of 283 brands
Shares a login with27 other brands

How to log in to a Brocade switch or network device

  • With Brocade hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • On Brocade equipment, sSH or Telnet to the management IP
  • For a Brocade switch, web management interface (HTTP/HTTPS) on managed models
  • Many Brocade models use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username admin with password brocade1.
  2. If that fails, use username admin with password password.
  3. Next, try username factory with password Fact4EMC.
  4. Another option is username root with password Serv4EMC.
  5. You can also try username root with password fibranne.
  6. Last, try username root with password fivranne (by Nicolas Gregoire).

Forgot the password? Reset your Brocade switch or network device

  1. undefinedConnect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Brocade default password

  • undefinedfull control of VLANs, routing and traffic mirroring.
  • undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
  • undefinedtelnet sends credentials in clear text: use SSH.

How to change it: To secure your Brocade switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Brocade default password FAQ

What is the default password for Brocade?

The most common default is "password". All 7 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Brocade username?

Common default usernames are "root", "admin", "factory", "user".

How do I log in to a Brocade switch or network device?

With Brocade hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username admin with password brocade1.

The Brocade default password doesn't work: what now?

If admin / brocade1 is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Brocade default password?

No. undefinedfull control of VLANs, routing and traffic mirroring. To secure your Brocade switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.