Juniper Default Password
Switches & Enterprise Networking · 7 default logins · Updated
The most common default login for Juniper devices is username "admin" and password "netscreen". There are 7 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
admin- Most common password
netscreen- Known combinations
- 7
This page lists the factory default usernames and passwords for Juniper switches, enterprise routers and network equipment. Juniper has 7 documented default logins. The most common username is admin (3 entries) and the most common password is netscreen (2 entries).
Juniper default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | admin | abc123 | Product-specific | https://kb.juniper.net/InfoCenter/index?page=content&id=KB26220&actp=search |
| 2 | admin | netscreen | Product-specific | — |
| 3 | admin | peribit | Product-specific | — |
| 4 | netscreen | netscreen | Same as username | — |
| 5 | redline | redline | Same as username | — |
| 6 | serial# | serial# | Same as username | Resets to factory settings |
| 7 | super | juniper123 | Vendor name | https://kb.juniper.net/InfoCenter/index?page=content&id=KB26220&actp=search |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Juniper defaults tell you
- 3 use the username as the password (for example netscreen / netscreen).
- 3 entries include a note on the product, access method or privilege level: check the Notes column.
- Juniper has the 27th longest default-credential list of the 283 vendors in our database.
- 2 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Juniper default login at a glance
| Brand | Juniper |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 7 |
| Unique usernames | 5 |
| Unique passwords | 6 |
| Blank passwords | 0 of 7 |
| List size rank | 27th of 283 brands |
| Shares a login with | 2 other brands |
How to log in to a Juniper switch or network device
- Juniper admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- With Juniper hardware, sSH or Telnet to the management IP
- On Juniper equipment, web management interface (HTTP/HTTPS) on managed models
- For a Juniper switch, sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username admin with password abc123 (https://kb.juniper.net/InfoCenter/index?page=content&id=KB26220&actp=search).
- If that fails, use username admin with password netscreen.
- Next, try username admin with password peribit.
- Another option is username netscreen with password netscreen.
- You can also try username redline with password redline.
- Last, try username serial# with password serial# (Resets to factory settings).
Forgot the password? Reset your Juniper switch or network device
- On the Juniper switch, connect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Juniper default password
- If a Juniper switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
- On an unprotected Juniper device, default SNMP community strings ("public"/"private") leak or change configuration.
- Risk for Juniper owners: telnet sends credentials in clear text: use SSH.
How to change it: To secure your Juniper switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
Juniper default password FAQ
What is the default password for Juniper?
The most common default is "netscreen". All 7 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Juniper username?
Common default usernames are "admin", "netscreen", "redline", "serial#".
How do I log in to a Juniper switch or network device?
Juniper admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username admin with password abc123 (https://kb.juniper.net/InfoCenter/index?page=content&id=KB26220&actp=search).
The Juniper default password doesn't work: what now?
If admin / abc123 is rejected, someone changed it after installation. On the Juniper switch, connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Juniper default password?
No. If a Juniper switch keeps its factory login: full control of VLANs, routing and traffic mirroring. To secure your Juniper switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.