Foundry Networks Default Password

Switches & Enterprise Networking · 2 default logins · Updated

Quick answer

The most common default login for Foundry Networks devices is username blank (leave it empty) and password blank (leave it empty). There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Foundry Networks ships many of its switches, enterprise routers and network equipment with publicly known default credentials, collected below. Foundry Networks has 2 documented default logins. The most common username is (blank) and the most common password is (blank).

Foundry Networks default username and password list

#UsernamePasswordTypeNotes
1(blank)(blank)Blank password—
2adminadminSame as username—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Foundry Networks defaults tell you

  • 1 of 2 entries use a blank password: leave the password field empty.
  • 1 entry has no username: type only the password.
  • 1 uses the username as the password (for example admin / admin).
  • Foundry Networks has the 110th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.

Foundry Networks default login at a glance

BrandFoundry Networks
CategorySwitches & Enterprise Networking
Known default logins2
Unique usernames2
Unique passwords2
Blank passwords1 of 2
List size rank110th of 283 brands
Shares a login with94 other brands

How to log in to a Foundry Networks switch or network device

  • For a Foundry Networks switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • Many Foundry Networks models use sSH or Telnet to the management IP
  • Foundry Networks admins often use web management interface (HTTP/HTTPS) on managed models
  • With Foundry Networks hardware, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password (blank).
  2. If that fails, use username admin with password admin.

Forgot the password? Reset your Foundry Networks switch or network device

  1. Foundry Networks: connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Foundry Networks default password

  • If a Foundry Networks switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
  • undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
  • undefinedtelnet sends credentials in clear text: use SSH.

How to change it: To secure your Foundry Networks switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Foundry Networks default password FAQ

What is the default password for Foundry Networks?

The most common default is "(blank)". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Foundry Networks username?

Common default usernames are "(blank)", "admin".

How do I log in to a Foundry Networks switch or network device?

For a Foundry Networks switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password (blank).

The Foundry Networks default password doesn't work: what now?

If (blank) / (blank) is rejected, someone changed it after installation. Foundry Networks: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Foundry Networks default password?

No. If a Foundry Networks switch keeps its factory login: full control of VLANs, routing and traffic mirroring. To secure your Foundry Networks switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.