Extreme Networks Default Password

Switches & Enterprise Networking · 1 default login · Updated

Quick answer

The most common default login for Extreme Networks devices is username "admin" and password blank (leave it empty). This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Looking for the default login of a Extreme Networks switch or network device? Below are the documented factory credentials. Extreme Networks has one documented default login: username admin with password (blank).

Extreme Networks default username and password list

#UsernamePasswordTypeNotes
1admin(blank)Blank password—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Extreme Networks defaults tell you

  • 1 of 1 entry uses a blank password: leave the password field empty.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.

Extreme Networks default login at a glance

BrandExtreme Networks
CategorySwitches & Enterprise Networking
Known default logins1
Unique usernames1
Unique passwords1
Blank passwords1 of 1
List size rank184th of 283 brands
Shares a login with33 other brands

How to log in to a Extreme Networks switch or network device

  • With Extreme Networks hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • On Extreme Networks equipment, sSH or Telnet to the management IP
  • For a Extreme Networks switch, web management interface (HTTP/HTTPS) on managed models
  • Many Extreme Networks models use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username admin with password (blank).

Forgot the password? Reset your Extreme Networks switch or network device

  1. Extreme Networks: connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Extreme Networks default password

  • With Extreme Networks defaults unchanged, full control of VLANs, routing and traffic mirroring.
  • If a Extreme Networks switch keeps its factory login: default SNMP community strings ("public"/"private") leak or change configuration.
  • On an unprotected Extreme Networks device, telnet sends credentials in clear text: use SSH.

How to change it: Replace admin / (blank) on every Extreme Networks device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Extreme Networks default password FAQ

What is the default password for Extreme Networks?

The documented default is username "admin" with password "(blank)".

What is the default Extreme Networks username?

The default username is "admin".

How do I log in to a Extreme Networks switch or network device?

With Extreme Networks hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username admin with password (blank).

The Extreme Networks default password doesn't work: what now?

If admin / (blank) is rejected, someone changed it after installation. Extreme Networks: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Extreme Networks default password?

No. With Extreme Networks defaults unchanged, full control of VLANs, routing and traffic mirroring. Replace admin / (blank) on every Extreme Networks device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.