Livingston Default Password

Switches & Enterprise Networking · 1 default login · Updated

Quick answer

The most common default login for Livingston devices is username "!root" and password blank (leave it empty). This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Livingston ships many of its switches, enterprise routers and network equipment with publicly known default credentials, collected below. Livingston has one documented default login: username !root with password (blank).

Livingston default username and password list

#UsernamePasswordTypeNotes
1!root(blank)Blank password—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Livingston defaults tell you

  • 1 of 1 entry uses a blank password: leave the password field empty.

Livingston default login at a glance

BrandLivingston
CategorySwitches & Enterprise Networking
Known default logins1
Unique usernames1
Unique passwords1
Blank passwords1 of 1
List size rank205th of 283 brands
Shares a login withNo other brand

How to log in to a Livingston switch or network device

  • On Livingston equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • For a Livingston switch, sSH or Telnet to the management IP
  • Many Livingston models use web management interface (HTTP/HTTPS) on managed models
  • Livingston admins often use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username !root with password (blank).

Forgot the password? Reset your Livingston switch or network device

  1. undefinedConnect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Livingston default password

  • undefinedfull control of VLANs, routing and traffic mirroring.
  • undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
  • If a Livingston switch keeps its factory login: telnet sends credentials in clear text: use SSH.

How to change it: Create a strong replacement with our password generator.

Livingston default password FAQ

What is the default password for Livingston?

The documented default is username "!root" with password "(blank)".

What is the default Livingston username?

The default username is "!root".

How do I log in to a Livingston switch or network device?

On Livingston equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username !root with password (blank).

The Livingston default password doesn't work: what now?

If !root / (blank) is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Livingston default password?

No. undefinedfull control of VLANs, routing and traffic mirroring. undefined