Milan Default Password

Switches & Enterprise Networking · 1 default login · Updated

Quick answer

The most common default login for Milan devices is username "root" and password "root". This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Milan ships many of its switches, enterprise routers and network equipment with publicly known default credentials, collected below. Milan has one documented default login: username root with password root.

Milan default username and password list

#UsernamePasswordTypeNotes
1rootrootSame as username—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Milan defaults tell you

  • 1 uses the username as the password (for example root / root).
  • 7 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.

Milan default login at a glance

BrandMilan
CategorySwitches & Enterprise Networking
Known default logins1
Unique usernames1
Unique passwords1
Blank passwords0 of 1
List size rank217th of 283 brands
Shares a login with7 other brands

How to log in to a Milan switch or network device

  • Many Milan models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • Milan admins often use sSH or Telnet to the management IP
  • With Milan hardware, web management interface (HTTP/HTTPS) on managed models
  • On Milan equipment, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username root with password root.

Forgot the password? Reset your Milan switch or network device

  1. Milan: connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Milan default password

  • undefinedfull control of VLANs, routing and traffic mirroring.
  • If a Milan switch keeps its factory login: default SNMP community strings ("public"/"private") leak or change configuration.
  • undefinedtelnet sends credentials in clear text: use SSH.

How to change it: Create a strong replacement with our password generator.

Milan default password FAQ

What is the default password for Milan?

The documented default is username "root" with password "root".

What is the default Milan username?

The default username is "root".

How do I log in to a Milan switch or network device?

Many Milan models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username root with password root.

The Milan default password doesn't work: what now?

If root / root is rejected, someone changed it after installation. Milan: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Milan default password?

No. undefinedfull control of VLANs, routing and traffic mirroring. undefined