Ion Default Password

Switches & Enterprise Networking · 2 default logins · Updated

Quick answer

The most common default login for Ion devices is username blank (leave it empty) and password "admin". There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Looking for the default login of a Ion switch or network device? Below are the documented factory credentials. Ion has 2 documented default logins. The most common username is (blank) and the most common password is admin (2 entries).

Ion default username and password list

#UsernamePasswordTypeNotes
1(blank)adminCommon wordvreau ceva
2AdministratoradminCommon wordvreau ceva

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Ion defaults tell you

  • 1 entry has no username: type only the password.
  • 2 entries include a note on the product, access method or privilege level: check the Notes column.
  • Ion has the 113th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.

Ion default login at a glance

BrandIon
CategorySwitches & Enterprise Networking
Known default logins2
Unique usernames2
Unique passwords1
Blank passwords0 of 2
List size rank113th of 283 brands
Shares a login with32 other brands

How to log in to a Ion switch or network device

  • With Ion hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • On Ion equipment, sSH or Telnet to the management IP
  • For a Ion switch, web management interface (HTTP/HTTPS) on managed models
  • Many Ion models use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password admin (vreau ceva).
  2. If that fails, use username Administrator with password admin (vreau ceva).

Forgot the password? Reset your Ion switch or network device

  1. Ion: connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Ion default password

  • undefinedfull control of VLANs, routing and traffic mirroring.
  • If a Ion switch keeps its factory login: default SNMP community strings ("public"/"private") leak or change configuration.
  • undefinedtelnet sends credentials in clear text: use SSH.

How to change it: To secure your Ion switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Ion default password FAQ

What is the default password for Ion?

The most common default is "admin". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Ion username?

Common default usernames are "(blank)", "Administrator".

How do I log in to a Ion switch or network device?

With Ion hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password admin (vreau ceva).

The Ion default password doesn't work: what now?

If (blank) / admin is rejected, someone changed it after installation. Ion: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Ion default password?

No. undefinedfull control of VLANs, routing and traffic mirroring. To secure your Ion switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.