Lucent Default Password
Switches & Enterprise Networking · 39 default logins · Updated
The most common default login for Lucent devices is username "sysadm" and password "cascade". There are 39 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
sysadm- Most common password
cascade- Known combinations
- 39
This page lists the factory default usernames and passwords for Lucent switches, enterprise routers and network equipment. Lucent has 39 documented default logins. The most common username is sysadm (3 entries) and the most common password is cascade (3 entries).
Lucent default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (any 3 characters) | cascade | Product-specific | — |
| 2 | (any 3 chars) | cascade | Product-specific | — |
| 3 | (blank) | admin | Common word | — |
| 4 | (blank) | cascade | Product-specific | — |
| 5 | Administrator | (blank) | Blank password | — |
| 6 | LUCENT01 | UI-PSWD-01 | Product-specific | requires GSI software |
| 7 | LUCENT02 | UI-PSWD-02 | Product-specific | requires GSI software |
| 8 | admin | AitbISP4eCiG | Product-specific | — |
| 9 | admin | Ascend | Product-specific | — |
| 10 | bciim | bciimpw | Product-specific | — |
| 11 | bcim | bcimpw | Product-specific | — |
| 12 | bcms | bcmspw | Product-specific | — |
| 13 | bcnas | bcnaspw | Product-specific | — |
| 14 | blue | bluepw | Product-specific | — |
| 15 | browse | browsepw | Product-specific | — |
| 16 | browse | looker | Product-specific | — |
| 17 | craft | craft | Same as username | — |
| 18 | craft | craftpw | Product-specific | — |
| 19 | cust | custpw | Product-specific | — |
| 20 | enquiry | enquirypw | Product-specific | — |
| 21 | field | support | Product-specific | — |
| 22 | inads | inads | Same as username | — |
| 23 | inads | indspw | Product-specific | — |
| 24 | init | initpw | Product-specific | — |
| 25 | locate | locatepw | Product-specific | — |
| 26 | maint | maintpw | Product-specific | — |
| 27 | maint | rwmaint | Product-specific | — |
| 28 | nms | nmspw | Product-specific | — |
| 29 | pw | pwpw | Product-specific | — |
| 30 | rcust | rcustpw | Product-specific | — |
| 31 | readonly | lucenttech2 | Vendor name | — |
| 32 | readwrite | lucenttech1 | Vendor name | — |
| 33 | root | ascend | Product-specific | — |
| 34 | super | super | Same as username | — |
| 35 | support | supportpw | Product-specific | — |
| 36 | sysadm | admpw | Product-specific | — |
| 37 | sysadm | sysadmpw | Product-specific | — |
| 38 | sysadm | syspw | Product-specific | — |
| 39 | tech | field | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Lucent defaults tell you
- 1 of 39 entries use a blank password: leave the password field empty.
- 2 entries have no username: type only the password.
- 3 use the username as the password (for example craft / craft).
- 2 entries include a note on the product, access method or privilege level: check the Notes column.
- Lucent has the 4th longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Lucent default login at a glance
| Brand | Lucent |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 39 |
| Unique usernames | 31 |
| Unique passwords | 37 |
| Blank passwords | 1 of 39 |
| List size rank | 4th of 283 brands |
| Shares a login with | 30 other brands |
How to log in to a Lucent switch or network device
- Many Lucent models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- Lucent admins often use sSH or Telnet to the management IP
- With Lucent hardware, web management interface (HTTP/HTTPS) on managed models
- On Lucent equipment, sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username (any 3 characters) with password cascade.
- If that fails, use username (any 3 chars) with password cascade.
- Next, try username (blank) with password admin.
- Another option is username (blank) with password cascade.
- You can also try username Administrator with password (blank).
- Last, try username LUCENT01 with password UI-PSWD-01 (requires GSI software).
Forgot the password? Reset your Lucent switch or network device
- On the Lucent switch, connect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Lucent default password
- Risk for Lucent owners: full control of VLANs, routing and traffic mirroring.
- With Lucent defaults unchanged, default SNMP community strings ("public"/"private") leak or change configuration.
- If a Lucent switch keeps its factory login: telnet sends credentials in clear text: use SSH.
How to change it: Lucent recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
Lucent default password FAQ
What is the default password for Lucent?
The most common default is "cascade". All 39 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Lucent username?
Common default usernames are "sysadm", "(blank)", "admin", "browse".
How do I log in to a Lucent switch or network device?
Many Lucent models use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (any 3 characters) with password cascade.
The Lucent default password doesn't work: what now?
If (any 3 characters) / cascade is rejected, someone changed it after installation. On the Lucent switch, connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Lucent default password?
No. Risk for Lucent owners: full control of VLANs, routing and traffic mirroring. Lucent recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.