Radware Default Password
Switches & Enterprise Networking · 2 default logins · Updated
The most common default login for Radware devices is username "lp" and password "lp". There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
lp- Most common password
lp- Known combinations
- 2
Looking for the default login of a Radware switch or network device? Below are the documented factory credentials. Radware has 2 documented default logins. The most common username is lp and the most common password is lp.
Radware default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | lp | lp | Same as username | — |
| 2 | radware | radware | Same as username | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Radware defaults tell you
- 2 use the username as the password (for example lp / lp).
- Radware has the 132nd longest default-credential list of the 283 vendors in our database.
Radware default login at a glance
| Brand | Radware |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 2 |
| Unique usernames | 2 |
| Unique passwords | 2 |
| Blank passwords | 0 of 2 |
| List size rank | 132nd of 283 brands |
| Shares a login with | No other brand |
How to log in to a Radware switch or network device
- With Radware hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- On Radware equipment, sSH or Telnet to the management IP
- For a Radware switch, web management interface (HTTP/HTTPS) on managed models
- Many Radware models use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username lp with password lp.
- If that fails, use username radware with password radware.
Forgot the password? Reset your Radware switch or network device
- undefinedConnect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Radware default password
- undefinedfull control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: Create a strong replacement with our password generator.
Radware default password FAQ
What is the default password for Radware?
The most common default is "lp". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Radware username?
Common default usernames are "lp", "radware".
How do I log in to a Radware switch or network device?
With Radware hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username lp with password lp.
The Radware default password doesn't work: what now?
If lp / lp is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Radware default password?
No. undefinedfull control of VLANs, routing and traffic mirroring. undefined