Osicom Default Password
Switches & Enterprise Networking · 11 default logins · Updated
The most common default login for Osicom devices is username "Manager" and password "User". There are 11 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
Manager- Most common password
User- Known combinations
- 11
Use this reference to log in to a Osicom switch or network device that is still on its factory settings. Osicom has 11 documented default logins. The most common username is Manager (2 entries) and the most common password is User (3 entries).
Osicom default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | Manager | Admin | Common word | — |
| 2 | Manager | Manager | Same as username | — |
| 3 | d.e.b.u.g | User | Common word | — |
| 4 | debug | d.e.b.u.g | Product-specific | — |
| 5 | echo | User | Common word | — |
| 6 | echo | echo | Same as username | — |
| 7 | guest | User | Common word | — |
| 8 | guest | guest | Same as username | — |
| 9 | sysadm | Admin | Common word | — |
| 10 | sysadm | sysadm | Same as username | — |
| 11 | write | private | Common word | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Osicom defaults tell you
- 4 use the username as the password (for example Manager / Manager).
- Osicom has the 14th longest default-credential list of the 283 vendors in our database.
- 5 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Osicom default login at a glance
| Brand | Osicom |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 11 |
| Unique usernames | 7 |
| Unique passwords | 8 |
| Blank passwords | 0 of 11 |
| List size rank | 14th of 283 brands |
| Shares a login with | 5 other brands |
How to log in to a Osicom switch or network device
- With Osicom hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- On Osicom equipment, sSH or Telnet to the management IP
- For a Osicom switch, web management interface (HTTP/HTTPS) on managed models
- Many Osicom models use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username Manager with password Admin.
- If that fails, use username Manager with password Manager.
- Next, try username d.e.b.u.g with password User.
- Another option is username debug with password d.e.b.u.g.
- You can also try username echo with password User.
- Last, try username echo with password echo.
Forgot the password? Reset your Osicom switch or network device
- Osicom: connect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Osicom default password
- If a Osicom switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: To secure your Osicom switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
Osicom default password FAQ
What is the default password for Osicom?
The most common default is "User". All 11 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Osicom username?
Common default usernames are "Manager", "echo", "guest", "sysadm".
How do I log in to a Osicom switch or network device?
With Osicom hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username Manager with password Admin.
The Osicom default password doesn't work: what now?
If Manager / Admin is rejected, someone changed it after installation. Osicom: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Osicom default password?
No. If a Osicom switch keeps its factory login: full control of VLANs, routing and traffic mirroring. To secure your Osicom switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.