Siemens Default Password
Switches & Enterprise Networking · 29 default logins · Updated
The most common default login for Siemens devices is username blank (leave it empty) and password "admin". There are 29 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
admin- Known combinations
- 29
Looking for the default login of a Siemens switch or network device? Below are the documented factory credentials. Siemens has 29 documented default logins. The most common username is (blank) (8 entries) and the most common password is admin (3 entries).
Siemens default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | 31994 | 31994 | Same as username | — |
| 2 | (blank) | 0 | Numeric PIN | — |
| 3 | (blank) | 123456 | Numeric PIN | http://wiki.unify.com/wiki/OpenStage_SIP_FAQ#What_are_the_default_passwords.3F |
| 4 | (blank) | admin | Common word | — |
| 5 | (blank) | 123456 | Numeric PIN | — |
| 6 | (blank) | (blank) | Blank password | — |
| 7 | (blank) | SKY_FOX | Product-specific | — |
| 8 | (blank) | gubed | Product-specific | — |
| 9 | 18140815 | 18140815 | Same as username | — |
| 10 | (blank) | uboot | Product-specific | — |
| 11 | WinCCAdmin | 2WSXcde | Product-specific | http://iadt.siemens.ru/forum/viewtopic.php?p=2974&sid=58cedcf3a0fc7a0b6c61c7bc46530928 |
| 12 | WinCCConnect | 2WSXcder | Product-specific | http://iadt.siemens.ru/forum/viewtopic.php?p=2974&sid=58cedcf3a0fc7a0b6c61c7bc46530928 |
| 13 | admin | (blank) | Blank password | — |
| 14 | admin | pwp | Product-specific | — |
| 15 | eng | engineer | Product-specific | — |
| 16 | op | op | Same as username | — |
| 17 | op | operator | Product-specific | — |
| 18 | poll | poll | Same as username | — |
| 19 | poll | tech | Product-specific | — |
| 20 | su | super | Product-specific | — |
| 21 | sysadmin | sysadmin | Same as username | — |
| 22 | system | field | Product-specific | — |
| 23 | system | system | Same as username | — |
| 24 | tech | tech | Same as username | — |
| 25 | admin | admin | Same as username | Also has an account with: |
| 26 | admin | hagpolm1 | Product-specific | — |
| 27 | basisk | basisk | Same as username | http://m.itworld.com/data-centerservers/190269/power-plant-hack-anybody-could-use |
| 28 | superuser | admin | Common word | — |
| 29 | tech | field | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Siemens defaults tell you
- 2 of 29 entries use a blank password: leave the password field empty.
- 8 entries have no username: type only the password.
- 9 use the username as the password (for example 31994 / 31994).
- 3 are numeric PINs, typical for keypads and service menus.
- 5 entries include a note on the product, access method or privilege level: check the Notes column.
- Siemens has the 6th longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Siemens default login at a glance
| Brand | Siemens |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 29 |
| Unique usernames | 15 |
| Unique passwords | 23 |
| Blank passwords | 2 of 29 |
| List size rank | 6th of 283 brands |
| Shares a login with | 124 other brands |
How to log in to a Siemens switch or network device
- With Siemens hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- On Siemens equipment, sSH or Telnet to the management IP
- For a Siemens switch, web management interface (HTTP/HTTPS) on managed models
- Many Siemens models use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username 31994 with password 31994.
- If that fails, use username (blank) with password 0.
- Next, try username (blank) with password 123456 (http://wiki.unify.com/wiki/OpenStage_SIP_FAQ#What_are_the_default_passwords.3F).
- Another option is username (blank) with password admin.
- You can also try username (blank) with password 123456.
- Last, try username (blank) with password (blank).
Forgot the password? Reset your Siemens switch or network device
- Siemens: connect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Siemens default password
- undefinedfull control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: To secure your Siemens switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
Siemens default password FAQ
What is the default password for Siemens?
The most common default is "admin". All 29 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Siemens username?
Common default usernames are "(blank)", "admin", "op", "poll".
How do I log in to a Siemens switch or network device?
With Siemens hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username 31994 with password 31994.
The Siemens default password doesn't work: what now?
If 31994 / 31994 is rejected, someone changed it after installation. Siemens: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Siemens default password?
No. undefinedfull control of VLANs, routing and traffic mirroring. To secure your Siemens switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.