Datacom Default Password

Switches & Enterprise Networking · 2 default logins · Updated

Quick answer

The most common default login for Datacom devices is username blank (leave it empty) and password "letmein". There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Datacom ships many of its switches, enterprise routers and network equipment with publicly known default credentials, collected below. Datacom has 2 documented default logins. The most common username is (blank) and the most common password is letmein.

Datacom default username and password list

#UsernamePasswordTypeNotes
1(blank)letmeinProduct-specific—
2sysadmsysadmSame as username—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Datacom defaults tell you

  • 1 entry has no username: type only the password.
  • 1 uses the username as the password (for example sysadm / sysadm).
  • Datacom has the 103rd longest default-credential list of the 283 vendors in our database.
  • 3 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.

Datacom default login at a glance

BrandDatacom
CategorySwitches & Enterprise Networking
Known default logins2
Unique usernames2
Unique passwords2
Blank passwords0 of 2
List size rank103rd of 283 brands
Shares a login with3 other brands

How to log in to a Datacom switch or network device

  • For a Datacom switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • Many Datacom models use sSH or Telnet to the management IP
  • Datacom admins often use web management interface (HTTP/HTTPS) on managed models
  • With Datacom hardware, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password letmein.
  2. If that fails, use username sysadm with password sysadm.

Forgot the password? Reset your Datacom switch or network device

  1. Connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Datacom default password

  • With Datacom defaults unchanged, full control of VLANs, routing and traffic mirroring.
  • If a Datacom switch keeps its factory login: default SNMP community strings ("public"/"private") leak or change configuration.
  • On an unprotected Datacom device, telnet sends credentials in clear text: use SSH.

How to change it: To secure your Datacom switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Datacom default password FAQ

What is the default password for Datacom?

The most common default is "letmein". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Datacom username?

Common default usernames are "(blank)", "sysadm".

How do I log in to a Datacom switch or network device?

For a Datacom switch, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password letmein.

The Datacom default password doesn't work: what now?

If (blank) / letmein is rejected, someone changed it after installation. Connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Datacom default password?

No. With Datacom defaults unchanged, full control of VLANs, routing and traffic mirroring. To secure your Datacom switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.