Ericsson Default Password
Switches & Enterprise Networking · 6 default logins · Updated
The most common default login for Ericsson devices is username blank (leave it empty) and password "help". There are 6 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
help- Known combinations
- 6
Looking for the default login of a Ericsson switch or network device? Below are the documented factory credentials. Ericsson has 6 documented default logins. The most common username is (blank) (2 entries) and the most common password is help (2 entries).
Ericsson default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | MD110 | help | Product-specific | — |
| 2 | admin | default | Common word | — |
| 3 | expert | expert | Same as username | — |
| 4 | netman | netman | Same as username | — |
| 5 | (blank) | help | Product-specific | — |
| 6 | (blank) | (blank) | Blank password | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Ericsson defaults tell you
- 1 of 6 entries use a blank password: leave the password field empty.
- 2 entries have no username: type only the password.
- 2 use the username as the password (for example expert / expert).
- Ericsson has the 33rd longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Ericsson default login at a glance
| Brand | Ericsson |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 6 |
| Unique usernames | 5 |
| Unique passwords | 5 |
| Blank passwords | 1 of 6 |
| List size rank | 33rd of 283 brands |
| Shares a login with | 47 other brands |
How to log in to a Ericsson switch or network device
- On Ericsson equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- For a Ericsson switch, sSH or Telnet to the management IP
- Many Ericsson models use web management interface (HTTP/HTTPS) on managed models
- Ericsson admins often use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username MD110 with password help.
- If that fails, use username admin with password default.
- Next, try username expert with password expert.
- Another option is username netman with password netman.
- You can also try username (blank) with password help.
- Last, try username (blank) with password (blank).
Forgot the password? Reset your Ericsson switch or network device
- undefinedConnect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Ericsson default password
- If a Ericsson switch keeps its factory login: full control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: To secure your Ericsson switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.
Ericsson default password FAQ
What is the default password for Ericsson?
The most common default is "help". All 6 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Ericsson username?
Common default usernames are "(blank)", "MD110", "admin", "expert".
How do I log in to a Ericsson switch or network device?
On Ericsson equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username MD110 with password help.
The Ericsson default password doesn't work: what now?
If MD110 / help is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Ericsson default password?
No. If a Ericsson switch keeps its factory login: full control of VLANs, routing and traffic mirroring. To secure your Ericsson switch: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.